
Fire Alarm Systems
Fire alarm and life-safety detection systems installed from approved drawings, programmed, tested device by device, and handed over with complete records.
A fire alarm system is a control panel, dedicated pathway cabling, and every life-safety device on it: smoke and heat detectors, pull stations, horns and strobes, and modules that tie in sprinkler switches, elevators and air handlers. We pull the cable, mount and wire the devices, program the panel to the sequence of operations, and test each device before handover.
What is included
- New commercial systems and tenant build-outs from stamped or approved shop drawings
- Control panels, remote annunciators, power supplies and standby batteries
- Smoke, heat and duct detectors, manual pull stations
- Horns, strobes, speakers and voice evacuation
- Monitor and control modules: sprinkler waterflow and tamper, elevator recall, door holders, fan shutdown
- Cellular and IP communicators that carry signals to a central monitoring station
- Residential interconnected smoke, heat, CO and gas detection
- Periodic inspection and testing visits, plus troubleshooting for troubles and ground faults
What you receive
As-built drawings with device addresses, the panel program on file, battery calculations, and a device-by-device test record ready for your building file.
Common questions
Can you work on a panel another company installed?
Often yes — it depends on the manufacturer. Some panels can be serviced by any qualified technician, while proprietary lines require dealer software. Send us a photo of the panel door or model tag and we will tell you plainly.
Who decides what a commercial fire alarm system has to include?
The adopted code, the engineer or designer of record, and the authority having jurisdiction. We build and test to the approved drawings and flag early if anything on site differs.

Need fire alarm systems work scoped?
Send the address and what you are trying to do. You get a written quote, priced line by line.